Hosein.T

ابعاد برداری و مهندسی معکوس فن سانتریفیوژ هویدیوتی صنعت فولاد و مدلسازی سه بعدی آن به همراه تهیه نقشه های ساخت و انفجاری در نرم افزار سالیدورکس

مدلسازی سه بعدی میوه ها با استفاده از تصاویر پزشکی برای برسی عمق نفوذ ضربه CT-Radiology tech Performing Non-Destructive Testing (NDT) which is one of the ordinary request of customers. In this case to check the damage of stored apples. Platform: Mimics Research 21 Materialise

طراحی تک تک قطعات، مدلسازی و اسمبلی یک استند لب‌تاپ و تهیه و نقشه های خروجی برای دستگاه برش لیزر با کمک نرم افزار سالیدورکس

Bollards very often vary between countries and ports due to historical and geographical factors, hawser/rope angles bollard will manage (determined by ship lading and tides), size and power of the vessels to be moored, the space and installation surface available for the bollard and etc. making it difficult to find a bollard that suits the needs of each port terminal. Strong forces that are very difficult to control, are often present during mooring. A strong gust of wind might cause the mooring arrangement to fail and the ship out of control. Therefore, the safety factors of bollards should not be underestimated. Single Bitt Bollard is one of the most popular bollard type within North and Latin American region. Over a period of time, Single Bitt bollard (very often also referred as pillar type bollard) has seen many improvements in design. This model, designed in Solidworks, and analyses carried out using ABAQUS Dassault Systèmes. مهندسی معکوس و تحلیل المان محدود بولارد های مخصوص اسکله.

Sinus Lift Procedure Sinus lift, also called sinus augmentation, is a procedure that makes it easier to place dental implants. Some patients need dental implants but have suffered bone loss, thus not having sufficient bone support necessary for implants. This procedure increases the amount of bone in the upper jaw that is required for dental implants. This is one of the most common bone grafting procedures for dental implant patients. This study measured maxillary sinus volume before and after grafting autogenous bone to the maxillary sinus floor. Maxillary sinus volumes were measured from Cone-beam computed tomography systems (CBCT) using a 3-dimensional reconstruction system (mimics software). اندازه گیری تغییرات حجم سینوس ماگزیلاری قبل و بعد از عمل سینوس لیفتینگ بر اساس تصاویر CBCT-SCAN و با استفاده از نرم افزارهای Mimics & 3-Matic. Platform: Mimics Research 21 & 3-Matic Research 13 Materialise

نقشه برداری و مهندسی معکوس سیستم ترمز دستی شفت